Fluorescent pigment Red 5 g

How a Small Batch of Neon Red Powder Can Power Big Creative Ideas

Fluorescent pigment Red in a 5 gram pack is designed for anyone who wants to try out a vivid glowing effect before committing to a larger production run. This compact size suits home crafters, beginner makeup artists, and small studios experimenting with epoxy resin, polymer clay, acrylic paints, or decorative cosmetics. The product belongs to the Fluorescent Pigments category, which brings together bright, saturated colorants that glow both in daylight and under ultraviolet light.

The strongest global demand for this type of pigment comes from decorative cosmetics: neon eyeshadows, nail polish, body art, face paint, and stage makeup for photoshoots and glow parties. Beyond beauty applications, the pigment is widely used in resin jewelry, keychains, slime, polymer figurines, and novelty items where a bold glowing color is the main selling point.

The recommended point of introduction is when the base material is at room temperature or slightly warmed, staying below 60-70 degrees, since excessive heat can dull the glowing effect. For cosmetic emulsions and polishes, the pigment should be dispersed right before use and mixed thoroughly until no clumps remain. A typical dosage ranges from 0.5 to 3 grams per 100 grams of base, depending on how intense the color and how transparent the final product should be. Lighter, semi-transparent formulas need only a small amount, while dense, opaque textures can take a higher concentration.

This pigment blends well with other shades in the range, making it easy to create gradients and custom tones. For warm orange-red transitions, try combining it with Fluorescent pigment orange, 50 g, while raspberry-pink hues work nicely alongside Fluorescent Pigment Pink 5 g. If a more fluid consistency is needed for spraying or fine detail work, consider pairing it with Pigment liquid fluorescent yellow 10 ml to build a smooth color transition.

The pigment does not dissolve in water, so it performs best in oil, wax, and resin bases, as well as alcohol and silicone systems. Before scaling up to a full batch, it is worth running a small test mix to confirm the exact concentration needed and check compatibility with other formula components. Store the pigment in a tightly sealed container, in a dry place away from direct sunlight, at room temperature, avoiding humidity that could cause the particles to clump together.

Thanks to its 5 gram size, this pigment is well suited for testing new formulas before scaling production, as well as for small craft projects that do not require a large volume of colorant.

Glowing Resin Coasters

Clear epoxy resin 100 ml

Hardener 50 ml

Fluorescent pigment Red 1.5 grams

Fine glitter 3 grams

Mix the resin and hardener ratio until the mixture is completely clear and free of streaks. Take a small portion of this mixture into a separate cup, add the pigment, and stir slowly until the color is fully and evenly dispersed. Fold in the glitter with a few gentle strokes, then pour the colored mixture into silicone coaster molds, tapping the mold lightly to release trapped air bubbles. Leave the coasters to set at room temperature for at least 24 hours away from dust, then pop them out of the molds and lightly sand the edges for a smooth finish.

Frequently asked questions

At what temperature should I add Fluorescent pigment Red to polymer clay?

Incorporate the pigment while the clay base is at room temperature or slightly warm, below 60-70 degrees. It colors the material without dissolving, so mix thoroughly for even neon red distribution. The 5 g size fits small test batches by hobbyists.

Is the 5 g pack of bright red fluorescent pigment enough for resin jewelry trials?

Yes, this pack allows testing the neon glow effect in epoxy creations before larger runs. Begin with a low dose and adjust based on your sample batch results. It suits individual makers exploring the vivid shade.

How should I store Fluorescent pigment Red until December 2041?

Keep the container in a dry spot away from sunlight to maintain the mineral component properties. This ensures the bright red color stays effective until the stated date. Prevent any moisture exposure.

Can I request a COA for this Fluorescent pigment Red?

A certificate of analysis is available upon request for the current batch. Provide your order details when asking. It covers the neon bright red characteristics of the mineral pigment.

INCI	May contain (+/-): CI 45380, CI 45410, CI 12075, CI 15850
Сертифікат
Сертифікат
Other
Application	nail art, decor, epoxy resin, candles
Att brand	China
Color product	red
Composition	HP series
Features	It has the property of glowing when exposed to ultraviolet rays, has a very bright color under normal lighting due to the fact that it partially reflects the light incident on it.
Inci	May contain (+/-): CI 45380, CI 45410, CI 12075, CI 15850
Minimum count	1
Name	Fluorescent pigment Red 5 g
Packaging	container for transportation
Packing	5 g
Pacticle size	10-15 µm
Sert	Download / Download
Solubility	pigments color, but do not dissolve
Type	non-migratory
View	powder
Valid until	12.2041
Sert
Sert