AMIGEL rheology guide: Sclerotium Gum in gels emulsions and suspensions

A comprehensive technical formulation guide dedicated to managing rheology in cosmetics using the natural polysaccharide AMIGEL (Sclerotium Gum). This article explores the physical mechanisms of polymer hydration and network formation for structuring clear gels, light emulsions, and particle-suspending fluids. It covers pre-dispersion in polyols, electrolyte stability, shear rate handling, incompatibility limits, thermal limits, and precise pH controls. Features three complete DIY recipes with step-by-step compounding instructions and cold storage standards.

Natpure Film AP: natural film-forming technology for skin color cosmetics and hair

A comprehensive technical formulation guide dedicated to utilizing the bio-based film former Natpure Film AP (derived from sugar cane) in color cosmetics and hair care. This article breaks down the physical mechanics of flexible film creation, moisture resistance, and pigment adhesion enhancement. It covers aqueous dissolution protocols, compatibility with natural polymers and gums, thermal boundaries, and precise pH controls. Features three complete DIY recipes with step-by-step compounding instructions and storage standards.

ViableCare LipoCare 8: integrating a liposomal ceramide complex into barrier-care formulas

A comprehensive technical formulation guide to designing skin barrier restoration creams and liposomal fluids using ViableCare LipoCare 8. This article breaks down the physiological mechanism of ceramide integration into stratum corneum lipids to stop transepidermal water loss. It details exact processing protocols to protect liposomal structures, low-shear cooling phase entry below thirty degrees Celsius, emulsifier compatibility, and pH boundaries. Features three complete DIY recipes with step-by-step compounding instructions and cold storage standards.

Fluorescent Blue Pigment 5 g

Bringing Neon Glow to Resin, Wax and Craft Projects with Blue Fluorescent Pigment

The Fluorescent Blue Pigment 5 g belongs to the Fluorescent Pigments section and delivers an intense neon blue tone that glows brightly under UV light while showing a vivid acid shade in regular daylight. This type of pigment is widely used across many industries: epoxy resin art and jewelry casting, polymer clay coloring, slime making, body art and face painting for UV parties, decorative candle production, and coloring of plastic items and novelty products. The small 5 g pack is well suited for trial batches, testing a shade before committing to larger production runs, and small home craft projects where precise dosing matters more than bulk quantity.

The pigment does not dissolve in water, so it performs best in oil-based, wax-based and polymer systems, including epoxy resins and plastisols. For an even, saturated color, add the pigment to a melted or liquid base at a temperature not exceeding 60-70 degrees Celsius, stirring thoroughly until all particles are fully dispersed without clumping. A typical dosage ranges from 0.1 to 1 gram of pigment per 100 grams of base, depending on the desired glow intensity and the density of the final piece. For deeper, more saturated results in resin castings, the concentration can be gradually increased while testing on small sample pours.

Blue fluorescent pigment blends well with other bright shades from the same line, allowing for gradients and multicolor effects. Pairing it with Lemon Fluorescent Pigment 50 g creates striking cool-warm contrasts, while combining it with Fluorescent pigment Green HX 18 5 g works well for ocean-wave or underwater-themed decorative pieces. To soften the intensity and create a pastel neon look, adding a small amount of White Fluorescent Pigment 50 g dilutes the shade and produces a gentler glow.

Store the pigment in a dry, dark place at room temperature, away from direct sunlight, which can gradually reduce fluorescence intensity over time. Keep the container tightly sealed after each use to prevent moisture and dust contamination. When handling the dry powder, wearing gloves and covering the work surface is recommended, since fine pigment particles disperse easily in the air and can tint nearby surfaces.

Glow-in-UV Resin Coaster Set

Clear epoxy resin 60 ml

Hardener 30 ml

Fluorescent Blue Pigment 0.3 g

Silicone coaster mold 1 pc

Date:

today

Author:

Анастасія, Тараща

Reviews

Дуже зручно робити замовлення онлайн.

Is the review useful? Yes (0) No (0)

Андрій, Полтава

Очень довольна качеством натуральных экстрактов. Они действительно работают и улучшают состояние кожи.

Елена, Терновка

Мило-опт - це магазин, який я рекомендую всім, хто хоче піклуватися про свою красу та здоров'я природним шляхом.

Other
Att brand	China
Color product	neon, bright blue
Composition	HP series
Features	It has the property of glowing when exposed to ultraviolet rays, has a very bright color under normal lighting due to the fact that it partially reflects the light incident on it.
Minimum count	1
Name	Fluorescent Blue Pigment 5 g
Packaging	container for transportation
Packing	5 grams
Solubility	pigments color, but do not dissolve
Type	non-migratory
Valid until	12.2041