Refine section

Filter by parameters

AMIGEL rheology guide: Sclerotium Gum in gels emulsions and suspensions

A comprehensive technical formulation guide dedicated to managing rheology in cosmetics using the natural polysaccharide AMIGEL (Sclerotium Gum). This article explores the physical mechanisms of polymer hydration and network formation for structuring clear gels, light emulsions, and particle-suspending fluids. It covers pre-dispersion in polyols, electrolyte stability, shear rate handling, incompatibility limits, thermal limits, and precise pH controls. Features three complete DIY recipes with step-by-step compounding instructions and cold storage standards.

Natpure Film AP: natural film-forming technology for skin color cosmetics and hair

A comprehensive technical formulation guide dedicated to utilizing the bio-based film former Natpure Film AP (derived from sugar cane) in color cosmetics and hair care. This article breaks down the physical mechanics of flexible film creation, moisture resistance, and pigment adhesion enhancement. It covers aqueous dissolution protocols, compatibility with natural polymers and gums, thermal boundaries, and precise pH controls. Features three complete DIY recipes with step-by-step compounding instructions and storage standards.

ViableCare LipoCare 8: integrating a liposomal ceramide complex into barrier-care formulas

A comprehensive technical formulation guide to designing skin barrier restoration creams and liposomal fluids using ViableCare LipoCare 8. This article breaks down the physiological mechanism of ceramide integration into stratum corneum lipids to stop transepidermal water loss. It details exact processing protocols to protect liposomal structures, low-shear cooling phase entry below thirty degrees Celsius, emulsifier compatibility, and pH boundaries. Features three complete DIY recipes with step-by-step compounding instructions and cold storage standards.

Cosmetic Ingredients Wholesale

Absolutes Wholesale

Active Complexes for Cosmetics Wholesale

Amino Acids & Proteins Wholesale

Antioxidants Wholesale

Ayurvedic Powders Wholesale

Biocides Wholesale

Thickeners and Gelling Agents in Bulk

Bulk Hydrosols for Cosmetics

Hydrocolloids in Bulk

Hydrolyzed Proteins Wholesale

Aromatic Fragrant Waters Wholesale

Fragrance Ingredients Bulk

Preservatives & Antioxidants Wholesale

Corneotherapy Wholesale

Cosmetic Clay Wholesale

Neutralizers/pH Correctors Wholesale

Surfactants Wholesale

Cosmetic Peelings Wholesale

Cosmetic Powders Wholesale

Silicones and Conditioning Surfactants for Hair Wholesale

Resins and Resinoids Wholesale

UV and SPF Filters Wholesale

Cosmetic Emollients Wholesale

Emulsifiers Wholesale

Enzymes, Filtrates and Lysates in Bulk

Why one active rarely covers the whole job

Production batches rarely rely on a single preservative, most recipes combine several actives at once to cover a broader range of bacteria, yeast and mold together. This section covers parabens, alcohol based preservatives, organic acid salts and ready made complex systems for cosmetic formulas.

Antioxidants sit in a separate category entirely, protecting against oil rancidity rather than microbial growth, a chemical breakdown problem rather than a biological one. These materials go into creams, serums, emulsions and shampoos, alongside emulsifiers, which build the stable structure of a product.

From a single active to a ready made system

Methylparaben and propylparaben remain the most accessible option thanks to their low use level, while benzyl alcohol and phenoxyethanol are often chosen when broader compatibility with other formula components is needed. Potassium sorbate belongs to the organic acid salt group with a gentler action profile.

Ready made systems like Cosgard or PRESERVASOL remove the need to combine several actives by hand, they already come balanced for a wide pH range. Thymol stands apart from this group, it is an antioxidant with an added antimicrobial effect.

What actually drives the final choice

The type of phase that needs protection, water or oil, sets the direction: gels and water based emulsions usually call for parabens or phenoxyethanol, while sensitive formulas suit gentler complex systems better.

Solvents matter too: propylene glycol and glycerin help distribute a preservative evenly through a formula, while anhydrous lanolin in the oil phase creates an environment where oxidation protection matters especially. This combination shows up often in formulas built around cosmetic clay.

Sourcing under different documentation requirements

Raw materials in this section ship from China, Germany, France, Italy, the United States, Israel, India and Poland, allowing a choice matched to a specific budget and formula requirement. Large volume batches come with documentation on request, particularly relevant for production runs with regular quality control.

A small trial batch before a larger order lets you confirm preservative compatibility with a specific formula in advance, this matters especially when switching to a new raw material supplier. It helps avoid reworking an already produced batch due to incompatibility between a preservative and the active ingredients in a formula.

Worth checking regardless of production scale.

FAQ

Can several preservatives be combined in one formula

Yes, complex preservation systems are often built by combining several actives to broaden protection against bacteria and mold at the same time.

How does a ready made system differ from a single active like a paraben

A ready made system already comes balanced for a wide pH range and needs no manual proportion adjustment, while a single active must be combined by hand.

Do you provide COA or SDS documents for preservatives

Yes, COA, SDS and MSDS documents are available on request, particularly for larger batches.

How long does assembling a production order take

Order assembly takes three to five business days, not counting weekends, holidays, or the working day right after a holiday.

Recommendations

When choosing a preservative or antioxidant for cosmetic production, check its compatibility with the pH and water phase of your formula. Mylo Opt has worked with private formulators and production facilities for over twelve years. Place your order by email with the item you need.

Sort by:

Show by:

Catalog view:

This section is still empty

You can go back to the catalog page or use the navigation or search on the site.

Home page