White Fluorescent Pigment 500 g

Why White Fluorescent Pigment Works as a Universal Base for Bright Glow Effects

Fluorescent pigments are widely used far beyond hobby crafts, playing a significant role in plastics manufacturing, signage, safety products, and decorative cosmetics worldwide. White fluorescent pigment in a 500 g pack belongs to the Fluorescent Pigments category, offering a strong base color for creating vivid glow effects under both ultraviolet and daylight conditions. This larger volume suits small-batch studio production as well as workshops testing formulations before scaling up. Browse additional shades in the Fluorescent Neon Pigments Wholesale section.

The primary industrial application of white fluorescent pigment lies in polymer and plastics manufacturing, epoxy resin casting, PVC and polyurethane products, where it serves as a neutral base for blending with vivid fluorescent shades. It is also commonly used in outdoor advertising, safety and traffic marking elements, fishing lures, and outdoor recreation gear, where high visibility under low light is essential. In decorative cosmetics, white fluorescent pigment appears in vivid nail lacquers, eyeshadows, body art paints, and occasionally in decorative candle making and bath bomb projects where a glowing accent is desired. The pigment blends well with other fluorescent colors, such as fluorescent pigment orange, fluorescent pigment light green, and pink fluorescent pigment, allowing formulators to create layered visual effects and adjust saturation.

Recommended dosage typically ranges from 1 to 5 percent of the total base mass, depending on the desired glow intensity and carrier material. For epoxy resins and polyurethanes, the pigment is introduced at room temperature during the mixing stage, before adding the hardener, and blended thoroughly until uniform. For textile printing and coating formulations, pre-dispersing the pigment in a small amount of binder before adding it to the main batch improves distribution and reduces clumping. Prolonged exposure of finished products to direct sunlight and excessive heat should be avoided, as this gradually reduces glow intensity over time.

Store the pigment in a dry place away from moisture and direct sunlight, in a tightly sealed container, at room temperature. Under proper storage conditions the material retains its properties for an extended period, making the larger pack size a practical and cost-effective choice for workshops and small manufacturing operations with recurring production cycles.

Glowing Resin Coasters with Layered Color Accents

Clear epoxy resin 400 g

Hardener 200 g

White fluorescent pigment 12 g

Fluorescent pigment light green 2 g

Silicone coaster mold set

Mix the epoxy resin and hardener thoroughly according to the ratio above until fully combined, then add the white fluorescent pigment and stir for two to three minutes until evenly dispersed throughout the mixture. Add a small amount of light green fluorescent pigment to one section of the mix and gently swirl with a wooden stick to create a marbled pattern without overmixing, which helps avoid trapped air bubbles. Pour the finished mixture into the silicone molds and leave to cure at room temperature for 24 hours, away from direct sunlight and dust.

Frequently asked questions