Mineral Oil WP350 165 L

Bulk Mineral Oil WP350 as a Reliable Base for Continuous Production Lines

A 165-liter drum of mineral oil WP350 is meant for manufacturers who need dependable, uninterrupted sourcing rather than a small trial batch. This volume typically serves pharmaceutical plants, cosmetic factories, lubricant producers and household chemical manufacturers where the base oil is consumed in large quantities month after month. The product belongs to the Liquid Basic Oils category, and mineral oil remains one of the most requested items worldwide within this group due to its consistent quality, oxidation resistance and long shelf stability in industrial packaging.

The largest global demand for mineral oil comes from the pharmaceutical sector, where it forms the base of ointments, suppositories and topical formulations. The second major field is cosmetic manufacturing: baby oils, body lotions, hand and foot creams, lip balms, makeup removers and barrier protection products. In technical applications, WP350 is used as a component of lubricating and cooling fluids and anti-corrosion coatings, while in candle production it softens paraffin blends, which is particularly valuable for gel candles. In the food industry, similar mineral oil grades are used to lubricate processing equipment and molds without affecting product quality.

Mineral Oil WP350 is supplied in volumes suitable for continuous production. Bulk Oils are chosen by cosmetic and pharmaceutical manufacturers. The ingredient is a viscous oily liquid with almost no scent.

Mineral oil is added during the oil phase mixing stage, usually at a temperature between 60 and 75 degrees, alongside waxes and emulsifiers. Its chemical inertness means it does not interact with active ingredients, making it a convenient base for complex formulations. Dosage depends on the final product: in creams the share typically ranges from 10 to 40 percent of the oil phase, while in dense barrier balms it can reach up to 60 percent. It pairs well with vegetable oils, such as Cotton Oil Refined 100 ml, allowing formulators to combine the neutrality of mineral oil with nourishing properties from plant-based components.

Before switching to bulk volumes, many manufacturers first test their formulas on smaller sizes such as Mineral Oil Base 50 ml or Mineral Oil Base 100 ml, which helps confirm emulsion stability and fine-tune ratios before committing to an industrial-scale purchase.

Store the oil in a tightly sealed container, in a dry place away from direct sunlight, at a temperature between 5 and 25 degrees. Under these conditions the product remains stable for an extended period without separating. Before use, large drums that have been stored for a long time should be thoroughly stirred.

Industrial Hand Protection Balm, 10000 g Batch

Mineral Oil WP350 3000 g

Beeswax 800 g

Emulsifying wax 600 g

Distilled water 5400 g

Preservative 120 g

Fragrance oil 80 g

Melt the oil phase containing the mineral oil, beeswax and emulsifying wax to 75 degrees. Heat the distilled water separately to the same temperature, then slowly pour the water into the oil phase while mixing continuously until a uniform emulsion forms. Once the mixture cools to 40 degrees, add the preservative and fragrance oil, blend thoroughly and transfer the finished balm into storage containers.

FAQ

What is the minimum wholesale batch and pack options for Mineral Oil WP350?

Mineral Oil WP350 starts from 165 liters in transport packaging. Exact batch sizes are listed in the specification available on request.

What is the extraction method for Mineral Oil WP350 and how does it affect quality?

The product is a mineral oil with INCI Paraffinum Liquidum.

Which documents accompany Mineral Oil WP350: COA and specification?

Current documents for this product are listed in the «Documents» block of the product card.

What is the comedogenic rating of Mineral Oil WP350 as a rough guide?

Comedogenic rating is not stated in the product data.