AMIGEL rheology guide: Sclerotium Gum in gels emulsions and suspensions

A comprehensive technical formulation guide dedicated to managing rheology in cosmetics using the natural polysaccharide AMIGEL (Sclerotium Gum). This article explores the physical mechanisms of polymer hydration and network formation for structuring clear gels, light emulsions, and particle-suspending fluids. It covers pre-dispersion in polyols, electrolyte stability, shear rate handling, incompatibility limits, thermal limits, and precise pH controls. Features three complete DIY recipes with step-by-step compounding instructions and cold storage standards.

Natpure Film AP: natural film-forming technology for skin color cosmetics and hair

A comprehensive technical formulation guide dedicated to utilizing the bio-based film former Natpure Film AP (derived from sugar cane) in color cosmetics and hair care. This article breaks down the physical mechanics of flexible film creation, moisture resistance, and pigment adhesion enhancement. It covers aqueous dissolution protocols, compatibility with natural polymers and gums, thermal boundaries, and precise pH controls. Features three complete DIY recipes with step-by-step compounding instructions and storage standards.

ViableCare LipoCare 8: integrating a liposomal ceramide complex into barrier-care formulas

A comprehensive technical formulation guide to designing skin barrier restoration creams and liposomal fluids using ViableCare LipoCare 8. This article breaks down the physiological mechanism of ceramide integration into stratum corneum lipids to stop transepidermal water loss. It details exact processing protocols to protect liposomal structures, low-shear cooling phase entry below thirty degrees Celsius, emulsifier compatibility, and pH boundaries. Features three complete DIY recipes with step-by-step compounding instructions and cold storage standards.

Emulpharma ECOTECH 30 g

Getting stable creamy textures right from a small trial batch

Emulpharma ECOTECH 30 g is a modern emulsifying complex designed to create stable oil-in-water emulsions across cosmetic formulations of varying complexity. This compact size is well suited for home cosmetic making and trial batches, allowing formulators to test a new recipe without risking a large volume of costly ingredients. This emulsifier belongs to the category of Emulsifiers, which brings together different binding agents for cosmetic emulsions, and it stands out for its gentle effect on skin and its ability to work at relatively moderate phase heating temperatures.

The main application of ECOTECH is in the production of face and body creams, lotions, hand emulsions, balms and cleansing milk. The ingredient is widely used by small cosmetic workshops, home formulators moving beyond basic soap making into skincare, and laboratories developing new formulas before scaling to production. The emulsifier is typically introduced into the oil phase at around 70-75 degrees Celsius, after which the oil and water phases are combined at matching temperatures and thoroughly mixed until a homogeneous, stable mass forms. A recommended dosage ranges from 3 to 6 percent of the total formula weight, depending on the desired thickness and stability of the emulsion.

ECOTECH pairs well with other stabilizers and thickeners, such as Glyceryl Monostearate 50 g, which reinforces the texture and gives the cream a richer, denser feel. For lighter, fast-absorbing emulsions it is often combined with Emulsifier EMULPHARMA PG20, 30 ml, helping to balance stability with a smooth application. In formulas that require extra firmness and a glossy finish, such as sticks or balms, a small amount of Carnauba Wax 100 g can be a useful addition.

The emulsifier should be stored in a dry, cool place away from direct sunlight and moisture, in a tightly sealed container. Under proper storage conditions the product retains its working properties throughout the manufacturer's stated shelf life. Before full-scale use it is advisable to check compatibility with other formula ingredients on a small test batch, especially when the recipe contains active additives or acids that might affect emulsion stability.

Light hydrating body lotion

Distilled water 62 ml

Sweet almond oil 9 g

Cocoa butter 5 g

Emulpharma ECOTECH 4 g

Glycerin 3 g

Fragrance oil 0.5 g

Preservative 0.6 g

Heat the water phase and the oil phase separately to 75 degrees Celsius, dissolving the emulsifier into the oil phase while stirring. Combine both phases, mix intensively until fully homogeneous, then cool to 40 degrees before adding glycerin, preservative and fragrance oil. Pour the finished lotion into a prepared container and let it stabilize for 24 hours at room temperature.

Date:

today

Author:

Роман, Львів

Reviews

Велике спасибі за якісні інгредієнти і професійний підхід. Завжди отримую замовлення вчасно, товари відповідають опису. Магазин заслуговує найкращих рекомендацій, буду замовляти у вас і надалі.

Is the review useful? Yes (0) No (0)

Ядвига, Йорк

Шукала натуральні солі для ванн. Знайшла їх саме в цьому магазині. Якість чудова, ефект розслабляючий. Результатом дуже задоволена!

Милена, Бердянськ

Замовляла тут основу для зубної пасти. Результат перевершив усі очікування!

INCI	EMULPHARMA ECOTECH
Other
Att brand	Italy
Attention	Mandatory testing for sensitivity and allergic reaction
Color product	yellow to pale yellow
Concentration	POLYGLYCERYL-3 COCOATE about 95%, water about 5%
Features	water-in-oil emulsion, introduced into the oil phase, can be heated up to 75 degrees
Input percentage	1-20%
Minimum count	1
Name	Emulpharma ECOTECH 30 g
Packaging	container for transportation
Packing	30 grams
Solubility	In oil
View	Liquid syrup
Valid until	05.2028