Pearl Green Metallic Powder 1 kg

Bulk Green Metallic Pigment Built for Continuous Manufacturing Lines

The 1 kg pack size targets manufacturers who need consistent color performance batch after batch, whether running a factory line or supplying a workshop that processes large volumes weekly. This pigment belongs to the Metallic Mica Powder range, which brings together mica-based shimmer pigments used across dozens of manufacturing sectors worldwide. The green shade comes from iron oxide layered onto mica particles, producing a deep emerald to mossy tone that shifts with light angle and coating thickness.

Global demand for pigments like this one is driven primarily by epoxy resin flooring, decorative wall coatings, automotive paints and clear coats, and polymer manufacturing, including resin art and craft casting supplied at commercial scale. The powder resists UV fading, which makes it a reliable choice for outdoor coatings and long-lasting industrial finishes. A secondary but significant application is color cosmetics production, where green mica is used in eyeshadow, nail lacquer, and body art formulations to create a shifting shimmer effect. On a smaller scale, the same pigment finds use in decorative candle wax and soap coloring, adding visible sparkle to finished pieces.

Recommended dosage depends on the base material and desired intensity: epoxy and polymer systems typically require between 1 and 5 percent of total batch weight, while cosmetic formulations may need anywhere from 3 to 15 percent depending on pigment density needed. The powder should be added at the final mixing stage once the base compound is fully prepared, avoiding sustained heating above 80 degrees Celsius to preserve particle integrity and shimmer uniformity. Sieving the pigment beforehand or pre-dispersing it in a small amount of carrier oil or plasticizer helps achieve even distribution across the entire batch.

Green mica blends smoothly with other dry pigments in the lineup, allowing manufacturers to build custom gradients and proprietary shades. Combining it with Pearl pigment White Blue produces cooler teal undertones suited for marine-themed finishes, while a small addition of Metallic Powder White Silver lightens the tone and softens overall saturation. For deeper, forest-like variations, formulators sometimes blend it with Metallic Powder Black in small proportions to achieve a shadowed, mossy depth.

Store the pigment in a sealed container at room temperature, away from direct sunlight and moisture, since water exposure causes clumping and reduces shimmer uniformity. Proper storage keeps the powder stable for extended periods, which matters for businesses purchasing bulk stock ahead of planned production runs.

Green Metallic Automotive Touch-Up Lacquer Batch

Clear automotive lacquer base 850 g

Thinner solvent 120 ml

Green metallic pigment 30 g

Disperse the pigment into the thinner solvent first, stirring until no clumps remain, then slowly pour this mixture into the clear lacquer base while mixing continuously for about six minutes. Strain the finished lacquer through a fine mesh filter before transferring it into spray equipment, and apply in thin even coats allowing each layer to flash off before the next application.