Red Holographic Glitter 1 kg

Bulk Holographic Sparkle for High-Volume Cosmetic and Craft Production

A 1 kg pack is built for manufacturing lines, full-cycle studios and bulk processors that need consistent particle size and reliable supply from batch to batch. Red holographic glitter belongs to the Glitters category, which brings together sparkle particles of various dispersion and color for decorative cosmetics, printing, candle making, holiday ornaments and craft supplies. The holographic effect comes from a multilayer film structure that refracts light and produces rainbow flashes over the base red tone, a feature highly valued in the nail industry, gel polish manufacturing, eyeshadow production, lip gloss and highlighter lines. Explore additional holographic shades and sizes in the Glitter Wholesale section.

The main use of this volume is conveyor-scale production: filling tubes and jars of color cosmetics, making acrylic dip powders for nail design, blending into base gels and polishes right before bottling. Large batches are also common in candle making with decorative inserts, resin jewelry and epoxy crafts, printing on packaging and greeting cards, textile screen printing, and holiday decor manufacturing such as tinsel, ornaments and wrapping paper. The particles tolerate reasonable temperature swings, which makes them suitable for mold casting, lamination and hot stamping processes.

It is best to introduce the glitter at the final stage of processing, once the main mass has cooled to around 35-45 degrees Celsius, to prevent particle deformation and clumping. Dosage depends on the desired sparkle density: a subtle shimmer needs about 0.5-1% of total product weight, while a bold effect calls for 3-5%. Blend thoroughly before adding to avoid clumps in the finished mixture.

Red holographic glitter works well with water-based, oil-based and silicone formulas, and disperses evenly in epoxy resins and polymer compounds. For shade variation and detail work on smaller decorative elements, compact packs from the same color line are convenient, such as Rich Red Glitter (0,4 mm) 1/64 5 g for sample batches and formula testing, or Rich Red Glitter (0,4 mm) 1/64 50 g for smaller production runs with a different particle dispersion. To add textural contrast in layered nail designs, formulators often pair it with the finer Glitter Red TS 205 (0.2 mm) 5 g, which creates a fine shimmering dust effect beside the larger holographic flakes.

Store the glitter in its original packaging, tightly sealed, in a dry area away from direct sunlight and humidity fluctuations to prevent clumping and dulling of the particles. Under proper storage conditions the product keeps its processing properties for a long time without losing brightness or dispersion uniformity.

Holographic Resin Decor Blend for Batch Production

Clear epoxy resin base 700 g

Hardener 350 g

Red Holographic Glitter 1 kg - 20 g per batch

UV stabilizer 4 g

Mix the resin and hardener slowly at room temperature until fully combined and free of streaks, then sift in the measured glitter in small portions while stirring continuously to avoid clumping and to keep particles evenly suspended. Add the UV stabilizer, stir for another two minutes, pour the mixture into molds, remove surface air bubbles with a heat gun, and let the pieces set undisturbed for 24 to 48 hours before demolding and packing for shipment.

Frequently asked questions