Orange Cosmetic Pigment 10 g

Getting a Reliable Warm Tone in Small-Batch Formulations

This orange cosmetic pigment comes in a compact 10 gram package aimed at home crafters and small studios testing new formulations before committing to larger volumes. It belongs to the Pigments section, which brings together dry colorants used in handmade soap, bath products, candle making, and resin art. Orange pigment is particularly popular among soap makers and bath bomb producers because it delivers a warm, saturated tone without bleeding into bathwater, and it is equally valued by candle makers and resin artists who need a shade that stays stable under heat and during curing.

In soap making, the pigment is typically introduced once the base has cooled to around 40-50 degrees Celsius for cold process work, or right after removing the melted base from a double boiler for hot process work. Dosage generally ranges from 0.5 to 2 grams per kilogram of base depending on the intensity desired, though since this is a concentrated dry colorant, it is safer to start with a smaller amount and build up gradually while stirring thoroughly to avoid streaking or speckled spots. Pre-dispersing the pigment in a small amount of carrier oil or glycerin before adding it to the batch helps distribute the particles evenly and prevents clumping in the finished bar.

For bath bombs, the pigment is usually blended into the dry ingredients - baking soda and citric acid - before the liquid components are added, which ensures even coloring throughout the mixture. Orange pairs naturally with yellow and red pigments for creating layered or ombre effects, and it also works well alongside mica powders for a subtle shimmering finish. In candle making, the pigment is stirred directly into melted wax at roughly 60-70 degrees Celsius until fully dissolved, and it is important not to exceed the recommended temperature range, since overheating can degrade the pigment particles and dull the final color.

When working with epoxy resin, the pigment should be added in small increments to the hardener or pre-mixed resin with continuous stirring, since too much colorant can affect clarity and interfere with proper curing. For clear pours and jewelry-making projects, a few tenths of a gram per 100 grams of resin is usually enough to achieve a rich orange tone, while opaque or solid-color pieces require a higher dosage. The pigment is compatible with most oil and wax-based systems and can also work in certain water-based formulations if properly dispersed beforehand, though running a small test batch is always recommended before scaling up a new recipe.

Store the pigment in a tightly sealed container away from direct sunlight and moisture, in a dry area at room temperature, to keep the color stable and prevent the powder from clumping. The 10 gram size is well suited for home crafters and anyone testing a new formulation on a small scale before moving to bulk production, since it allows the colorant's behavior to be evaluated in a specific base without unnecessary waste.

Layered Orange Sunset Candle

Soy wax flakes 150 g

Coconut wax 30 g

Orange cosmetic pigment 0.4 g

Fragrance oil sweet orange 10 ml

Cotton wick with tab 1 pc

Melt the soy and coconut wax together in a double boiler at around 65-70 degrees Celsius, stirring gently until fully liquid. Pour a small portion of the melted wax into a heatproof container without any pigment and set it aside briefly to cool slightly. Mix the pigment into the remaining wax, stirring continuously until the color is fully even, then add the fragrance oil and stir again. Secure the wick at the center of the jar, pour the clear layer first and let it firm up slightly, then slowly pour the colored wax on top to create a soft two-tone effect. Allow the candle to cure undisturbed at room temperature for at least 24 hours before trimming the wick and lighting it for the first time.