Metallic Powder Green 1 kg

Why Green Mica Pigment in Bulk Matters for Continuous Production Lines

A 1 kg pack of green metallic powder is built for manufacturers who need a dependable, uninterrupted supply rather than repeated small reorders. This pigment sits within the Metallic Mica Powder range, a group of mica-based powders valued for their consistent shimmer across very different industrial contexts. Global demand for such pigments comes primarily from resin and polymer casting, epoxy flooring, automotive coatings, decorative plasters, printing inks, and candle manufacturing, with cosmetic use being just one of several application areas rather than the dominant one.

In resin and epoxy production, the green pigment is typically blended in right after the resin and hardener are combined, stirred thoroughly until no clumps remain visible. In coating and paint formulations, it is best dispersed at room temperature or mild warmth, since heating the base above roughly 80 degrees Celsius can dull the metallic reflectivity of the mica particles. A general starting dosage is around 2 to 6 grams per 100 grams of finished product, though the exact ratio should be confirmed with a small test batch before committing a full production run, as base viscosity strongly affects how the shimmer reads visually. For candle manufacturing, the powder is stirred into melted wax at approximately 70 to 80 degrees Celsius, with continuous mixing to prevent settling at the bottom of the mold.

Green pairs naturally with other shades in the lineup to build gradient effects or layered finishes on large production runs. It works well alongside Silver Pearl Metallic Powder for a cooler, restrained metallic look, and can be contrasted with Red Pearl Pigment when a bolder decorative statement is needed across a product line. For deeper, muted variations reminiscent of bottle glass or dark pine, small amounts of Metallic Powder Burgundy can be blended in to widen the final color range.

In cosmetic manufacturing, the same pigment appears in eyeshadow, highlighter, shower gel, and occasionally decorative soap formulations, though this remains a secondary example compared to the industrial volumes described above. The powder holds up well against most alkaline and acidic environments, which also makes it suitable for household chemical products and gel-based formulations.

Store the powder in a tightly sealed container, away from direct sunlight, moisture, and temperature swings, since humidity can cause the fine particles to clump together over time. With a bulk 1 kg pack, resealing the container promptly after each use is essential to keep the remaining stock consistent across multiple production batches.

Large-Batch Green Shimmer Candle Pour

Soy or paraffin wax 3000 g

Fragrance oil 90 ml

Green Metallic Powder 45 g

Stearic acid 60 g