ERCAQUAT HRC 1 kg

A Ready-Made Base That Speeds Up Hair Care Product Development

ERCAQUAT HRC 1 kg is a concentrated self-emulsifying base built specifically for manufacturing hair conditioners, masks, balms and leave-in creams. It belongs to the category of silicones and conditioning surfactants for hair, which brings together ingredients responsible for slip, detangling and protecting the hair shaft from mechanical damage. This kind of raw material is most in demand within professional and semi-industrial hair care manufacturing, as well as small-batch studio production of finished product lines.

The working mechanism of ERCAQUAT HRC relies on a quaternary cationic compound combined with fatty alcohols, so once diluted with water it forms a stable creamy emulsion without needing a separate emulsifier. The 1 kg pack size is convenient for labs, small workshops and startup brands that want to pilot formulations before scaling up or produce limited runs of branded conditioners. The material is added to the hot water phase at around 70-75 degrees Celsius, after which the batch is cooled under continuous stirring until a smooth cream forms.

A typical usage rate in a finished conditioner ranges from 3 to 8 percent of the total formula, depending on the desired thickness and conditioning strength. For intensive repair masks the level can be raised to 10-12 percent, while light spray conditioners and leave-in serums usually call for 1-2 percent with additional dilution. It pairs well with natural oils and silicone alternatives: adding Natural Coconut Silicone boosts slip and eases wet detangling, while Coco Caprylate softens the texture and removes any greasy after-feel from the finished emulsion.

When building multifunctional formulas, this base is often combined with polymeric conditioners such as Polyquaternium 39, which strengthens styling hold and static control, especially for colored or chemically treated hair. It is compatible with most active additives used in cosmetic chemistry, including panthenol, hydrolyzed proteins, botanical extracts and essential oils, which should be introduced during the cooling stage below 40 degrees to preserve heat-sensitive actives.

Store the base in a tightly closed container, in a dry place at room temperature, away from direct sunlight and heat sources. Under proper storage conditions the material keeps its processing properties stable for the full stated shelf life, which matters for manufacturers planning consistent, repeatable batches.

Deep Repair Conditioner for Damaged Hair

ERCAQUAT HRC 45 g

Distilled water 890 g

Natural Coconut Silicone 20 g

Coco Caprylate 10 g

Polyquaternium 39 15 g

Panthenol 10 g

Fragrance 5 g

Preservative 5 g

Heat the water to 75 degrees Celsius and slowly add ERCAQUAT HRC while stirring continuously until fully dissolved. Cool the mixture to 40 degrees, then blend in the Natural Coconut Silicone and Coco Caprylate, followed by Polyquaternium 39, panthenol, fragrance and preservative. Mix until the emulsion is uniform and pour into containers once it has cooled to room temperature.