Mica Covapearl Pure Carmine 100 g

A Deep Carmine Pearl Pigment for Decorative Cosmetics and Craft Production

Mica Covapearl Pure Carmine in a 100 gram package is a concentrated pearlescent pigment with a rich carmine red tone that finds use well beyond cosmetics alone — it is widely applied by makers of decorative makeup, resin artists, polymer clay crafters, nail technicians and candle producers. This quantity suits studio-level and small-batch manufacturing, where consistent color batches are produced regularly and a reliable colorant supply matters more than a single trial run. The item belongs to the Mica Powders section, which brings together pearlescent pigments of varying shades and intensities for a broad range of applications.

The primary demand for this pigment comes from decorative cosmetics: eyeshadows, blushes, highlighters, lipsticks and lip glosses, where the carmine pearl delivers a deep shimmering color with a distinct metallic shine. The powder disperses evenly in both dry blends and liquid emulsions, retaining its shine once the finished product sets. The second major application is epoxy resin and polymer clay work, where the pigment gives jewelry pieces, coasters and decorative panels an eye-catching pearlescent glow. It is also used in nail art formulations, in decorative candles to create a colored pearl layer within the wax, and occasionally in soap making for a visual accent on the surface of finished bars.

Dosage depends on the intended product: decorative cosmetics generally require around 1 to 5 grams per 100 grams of base, epoxy resin formulations typically use 0.5 to 2 grams depending on desired color depth, while polymer clay can accept a higher load, up to 8 to 10 grams, for a deeply saturated tone. The pigment should be introduced during the mixing stage of the base, at a temperature not exceeding 70 degrees Celsius — higher heat does not degrade the mica itself but may affect the stability of other formula components. Before adding to a liquid phase, it is advisable to pre-disperse the powder in a small amount of oil or glycerin to prevent clumping and ensure an even color distribution throughout the batch.

Carmine mica blends well with other pearlescent and pigment additives, opening up possibilities for shade transitions and layered color effects. For warmer, golden-red compositions, Mica Antique Gold adds depth and a warm metallic glow. For a bolder red accent, the Warm Red mica pigment blend is a good match, while Oriental Beige Mica works well for softening the tone and building gentler, nude-leaning transitions. Combining these pigments allows manufacturers to build product lines with varying intensities within the same color family.

The pigment should be stored in a dry place away from direct sunlight, in a tightly sealed container that prevents moisture contact — exposure to water leads to clumping and makes even color distribution difficult later on. When storage conditions are respected, the powder retains its color stability and shine over an extended period, making it convenient for repeated use in ongoing production cycles.

Carmine Pearl Resin Coasters

Clear epoxy resin 200 g

Hardener 100 g

Mica Covapearl Pure Carmine 3 g

Isopropyl alcohol a few drops for surface bubbles

Measure the resin and hardener according to their working ratio and mix thoroughly for about three minutes until fully combined and free of streaks. Divide the mixture into two portions, add the mica to one portion and stir until the color is fully uniform without visible specks. Pour the tinted resin into a silicone coaster mold in a thin layer, followed by the clear portion to build depth, tilting the mold gently to create a marbled pearl effect. Pass a heat gun quickly over the surface to release trapped air bubbles and let the piece cure undisturbed for at least twenty-four hours at room temperature.