Bright Green Color Powder (fat-soluble) 1 kg

Consistent bright green shade for large-batch wax and oil-based manufacturing

Bright Green Color Powder (fat-soluble) in a 1 kg package is designed for manufacturers who need repeatable color intensity when processing large volumes of raw material batch after batch. This format is widely used in candle production, polymer and plastic manufacturing, oil-based decorative cosmetics, and household chemical goods where consistent shade matching across production runs matters most. This powder belongs to the category of Oil Based Food Coloring Powder, which brings together pigments that dissolve fully in oils, waxes, paraffin and other lipophilic media without leaving sediment or altering the texture of the finished product.

The most common global application for this type of coloring agent is candle manufacturing, where a saturated green pigment gives paraffin and wax blends an even tone, including on high-volume casting and conveyor lines. The second major area is plastics and polymer production, where fat-soluble colorants are introduced directly into the melt to achieve stable, uniform coloring without pigment migrating to the surface of the finished item. The powder is also used in oil-based decorative cosmetics such as lipsticks, balms, solid creams and wax-based pencils, and occasionally in colored soap manufacturing where resistance to alkaline environments is required.

Dosage depends on the desired color depth and the type of base: typically between 0.5 and 3 grams of powder per kilogram of finished blend is sufficient, though the exact concentration should be verified with a small test batch before scaling up to the full production run. The powder should be added once the base is fully melted and reaches a temperature between 60 and 80 degrees Celsius, ensuring complete dissolution of pigment particles without lumps or specks. Before adding the colorant, the base should be thoroughly mixed to uniform consistency, and stirring should continue for several minutes after the powder is introduced to guarantee even distribution across the entire volume.

The bright green shade blends well with other colors from the range to produce intermediate tones and gradient effects. For small test batches and fine-tuning of shade before scaling, a 10 gram package is convenient - for instance, Green Color Powder (fat-soluble) 10 g allows testing a combination before committing to the full kilogram volume. Blending with Violet Color Powder (fat-soluble) 10 g produces deep emerald and teal-violet transitions, while adding Blue Color Powder (fat-soluble) 10 g helps achieve cool sea and turquoise tones popular in decorative candles and cosmetic lines.

The powder should be stored in a tightly sealed container, in a dry place away from direct sunlight and at room temperature, avoiding any contact with moisture that could cause the powder to clump. Under proper storage conditions the pigment retains stable coloring performance for a long period, which is especially valuable for manufacturers who purchase raw material in advance for several production cycles.

Large batch of green wax melt cubes

Soy wax or paraffin wax 4000 g

Bright Green Color Powder (fat-soluble) 6 g

Fragrance oil eucalyptus or pine 90 ml

Coconut oil 60 ml

Small silicone melt molds 80 pcs

Melt the wax in a double boiler until it reaches 70-75 degrees Celsius, then stir in the coconut oil until fully combined. Gradually add the colorant in small amounts, mixing continuously until the blend reaches a uniform bright green tone with no visible specks. Once the pigment has fully dissolved, cool the mixture slightly to around 60 degrees Celsius, stir in the fragrance oil, and pour quickly into the molds, allowing the cubes to set at room temperature for several hours until completely firm.