Green Oil Soluble Liquid Colorant 1 L

Bringing Consistent Green Tone to Oil and Wax Systems at Production Scale

A 1 liter bottle of green oil soluble colorant is built for manufacturers who need dependable color from batch to batch without interrupting a running production line. This product sits within the Oil soluble liquid dyes range, a family of colorants that has become a standard tool wherever an even, sediment-free tint is required in oils, waxes and fats. See additional shades and formats in the Oil Soluble Liquid Dyes Wholesale section.

The largest global demand for green oil soluble colorant comes from candle manufacturing. Paraffin, soy wax, palm and coconut wax all take this colorant smoothly, producing a clean, saturated shade without clouding the melt as it cools. For decorative and container candles, the colorant is typically added once the wax is fully melted, around 65-80 degrees Celsius, and stirred thoroughly until dissolved. The second major application area is oil-based skincare and color cosmetics: lip balms, body oils, cream formulations, solid perfumes, and massage candles. Here the pigment is blended into a warmed oil phase in small increments, building up to the desired depth of color gradually. The same colorant is also used in technical greases, wax coatings, polishing compounds, and select household chemical products where non-polar media need coloring.

Recommended dosage typically starts around 0.1-0.5 ml per 100 g of oil or wax base, with the final concentration adjusted through testing depending on the density of the carrier and the desired shade depth. For cooler, teal-leaning results, green blends well with Blue Oil Soluble Liquid Colorant, while warmer, grassier tones can be reached by mixing in Lemon Oil Soluble Liquid Colorant. For multi-color product lines requiring contrasting accents, formulators often keep Red Oil Soluble Liquid Colorant on hand as well, since these three shades together cover most color needs without stocking dozens of separate items.

An important note is that oil soluble colorants do not disperse directly into water phases, so in cream or lotion formulations they must be introduced into the oil or wax portion before combining with the aqueous phase. Store the bottle tightly sealed, away from direct sunlight and temperature swings, at room temperature, to keep the color stable throughout the working life of the 1 liter container in a production environment.

Layered Green Wax Melt Bar

Soy wax 400 g

Coconut wax 100 g

Fragrance oil 20 ml

Green oil soluble colorant 3 ml

Melt the soy and coconut wax together over a double boiler until fully liquid, remove from heat, let cool slightly to around 70 degrees, then stir in the fragrance oil until evenly distributed. Divide the mixture into two portions, add the green colorant to one portion and blend until uniform, then pour the tinted and plain layers alternately into a silicone mold to create a striped wax melt bar, allowing each layer to set for a few minutes before adding the next, and leave the finished bar at room temperature for at least 4 hours before unmolding.

Frequently asked questions