Survicode, 2 g

Survicode: Your Key to Youthful, Resilient Skin

Unlock the secret to visibly younger and more resilient skin with Survicode, a cutting-edge active ingredient originating from France. Presented as a fine white crystalline powder with excellent water solubility, Survicode (INCI: Sodium Cocoyl Alaninate) is a powerful addition to your anti-aging and protective skincare formulations. With a recommended inclusion rate of 1%, or up to 2% in specific applications, this innovative ingredient is designed to empower skin cells and enhance their natural defense mechanisms.

Description and Key Features

Survicode is a highly effective, advanced cosmetic active ingredient that leverages the power of cellular communication to promote skin vitality. As a fine white crystalline powder, it is easy to incorporate into aqueous solutions, dissolving readily to form a clear solution. Its typical pH range of 8-9 indicates its alkaline nature, which should be considered during formulation to ensure the final product's pH is skin-compatible.

Key features:

• Cellular Longevity & Protection: Survicode works at the cellular level to enhance the skin's natural ability to withstand daily environmental stressors and combat the effects of aging. It helps to protect the "survival code" of skin cells, supporting their optimal function and longevity.
• Anti-Aging Powerhouse: By promoting cellular resilience, Survicode contributes to a visible reduction in the signs of aging, leading to firmer, smoother, and more youthful-looking skin.
• Enhanced Skin Barrier Function: It supports the integrity of the skin's barrier, which is crucial for maintaining hydration and protecting against external aggressors.
• Water Soluble: Its excellent water solubility makes it highly versatile for incorporation into a wide range of water-based and emulsion systems.
• French Quality: Sourced from France, ensuring high standards of quality and purity.

Versatile Applications and Usage Areas in Cosmetics

Survicode's multifaceted benefits make it an exceptional active ingredient for a broad spectrum of high-performance skincare products focused on anti-aging, protection, and overall skin health:

• Anti-Aging and Rejuvenating Cosmetics:
  • Anti-Aging Serums: As a potent active, Survicode shines in concentrated serums designed to target fine lines, wrinkles, and loss of firmness. Its water solubility allows for lightweight, fast-absorbing formulations.
  • Youth-Preserving Creams: Incorporate into facial creams, neck creams, and décolleté treatments to enhance skin's resilience against chronological and environmental aging.
• Day Creams and Night Creams:
  • Protective Day Creams: Fortify daily moisturizers with Survicode to help skin defend itself against daily stressors like pollution and UV radiation (when combined with SPF).
  • Restorative Night Creams: Boost overnight recovery processes, allowing skin to repair and rejuvenate more effectively while you sleep.
• Sunscreen Creams and Emulsions:
  • Synergistic Protection: While not an SPF ingredient itself, Survicode can be a valuable addition to sunscreen formulations. It complements UV filters by supporting the skin's intrinsic defense mechanisms against photoaging and environmental damage. This provides a more holistic approach to skin protection.
  • After-Sun Products: Include in after-sun lotions or gels to help soothe and support skin recovery following sun exposure, capitalizing on its protective and restorative properties.
• Specialized Skincare:
  • Eye Creams: Target the delicate skin around the eyes, helping to reduce the appearance of crow's feet and improve skin elasticity in this vulnerable area.
  • Anti-Pollution Products: Formulate serums and creams specifically designed to protect skin from the damaging effects of urban pollution, leveraging Survicode's cellular protection benefits.
  • Repairing Balms and Gels: For skin needing intensive care, Survicode can aid in the skin's natural repair processes.

Usage Rate Guidelines:

• For general anti-aging and daily protective creams and emulsions, a 1% inclusion rate is highly effective.
• In more targeted treatments, such as intensive anti-aging serums or specialized repair formulations, the inclusion rate can be increased to 2% for enhanced benefits.

Always remember to consider the final product's pH when formulating with Survicode, as its inherent pH of 8-9 may require adjustment to ensure optimal skin compatibility (typically pH 5.0-6.0 for most skincare).

Cosmetic Recipe: "Daily Resilience" Anti-Aging Facial Serum

Create a lightweight, hydrating, and protective facial serum utilizing Survicode to support skin's youthful appearance and resilience.

Instructions for Preparation:

1. Sanitization: Thoroughly sanitize all your equipment (beakers, stirring rods, serum bottles) using isopropyl alcohol and allow them to air dry completely.
2. Hydrate Hyaluronate (Optional pre-step): In a separate small container, mix the Sodium Hyaluronate powder with about 10-20ml of distilled water. Let it sit for at least 15-30 minutes (or longer, even overnight) to fully hydrate and form a clear gel. This helps prevent clumping when added to the main batch.
3. Combine Phase A: In a clean beaker, measure out the main portion of distilled water. Add the glycerin. Stir until fully mixed.
4. Dissolve Survicode: Add Survicode powder to the water/glycerin mixture. Stir thoroughly until it is completely dissolved and the solution is clear. Gentle heating (up to 40°C) can help dissolve it faster if needed, but it should dissolve at room temperature with sufficient stirring.
5. Incorporate Hydrated Hyaluronate: Add the pre-hydrated Sodium Hyaluronate gel (or the powder if not pre-hydrating) to the main solution. Stir very well until it is fully incorporated and the serum starts to thicken slightly.
6. Add Preservative: Add your chosen broad-spectrum preservative to the serum mixture. Stir thoroughly for at least 2-3 minutes to ensure it's evenly distributed.
7. pH Adjustment: Check the pH of your serum using a pH meter or pH strips. Survicode has an alkaline pH (8-9), so your serum's pH will likely be higher than desired. Carefully add a few drops of 50% Lactic Acid solution, stirring well after each addition, and recheck the pH. Aim for a final pH between 5.0 and 5.5, which is optimal for skin compatibility and preservative efficacy.
8. Final Transfer: Carefully pour the finished serum into a clean, sterile dark glass bottle with a dropper or pump dispenser.

Recommendations for Application and Use:

• Optimal Dosing: The recommended 1-2% inclusion of Survicode is effective. This recipe uses 1.5% for a balanced approach to daily anti-aging and protection.
• pH Management: Due to Survicode's inherent pH, pH adjustment is a crucial step. Always aim for a final product pH that is skin-compatible (typically 5.0-5.5 for serums) and optimal for your chosen preservative.
• Incorporation: As Survicode is a powder, ensure it is fully dissolved in the water phase before adding other ingredients to avoid gritty textures or undissolved particles.
• Storage: Store the finished serum in a cool, dark place, away from direct sunlight. The use of a dark glass bottle helps protect light-sensitive ingredients and maintain product stability.
• Consistency: For best results, use the serum twice daily, in the morning and evening, after cleansing and toning. Apply 2-3 drops to your face and neck, gently massaging until absorbed, before applying moisturizer.
• Synergy with Sunscreen: While Survicode enhances skin's resilience, it does not replace UV filters. Always recommend using a broad-spectrum sunscreen as the final step in a morning routine when using products containing Survicode for comprehensive daily protection.
• Layering: This serum can be easily layered with other skincare products, such as moisturizers and facial oils. Apply lighter consistency products (like serums) before heavier ones.